Product Features

1. Both XCF and KYF flotation machines are inflated flotation machines with small impeller diameter and low circumferential speed, which can reduce power by 30-50%. There is an air distributor in the tank, so the air is evenly dispersed; the impeller is a centrifugal pump. The utility model can fully suspend the solid particles; the U-shaped groove structure can make the tailings precipitate less; the impeller structure and the blade gap flow design are reasonable, the impeller wear is relatively uniform, and the impeller and the stator have a long service life. 2. KYF type has no self-priming slurry capacity and low power; while XCF type has self-priming slurry capacity and can be horizontally arranged without foam pump. The difference is that a stator is specially set above the impeller to form a special negative pressure. District, but the power consumption is slightly higher than KYF. Therefore, XCF type and KYF type are generally configured as units, XCF type is suction tank, KYF type is DC tank, and the combined unit can be horizontally arranged without foam pump. 3. The combined unit of XCFII/KYFII flotation machine adopts “U” type trough body, hollow shaft is inflated and suspended stator, especially a new impeller is adopted. This is a cone-shaped impeller with a blade that is inclined at an angle. It is similar to a high-speed centrifugal pump wheel. It has a large amount of slurry, small head, low power consumption and simple structure. At the same time, the air is well dispersed and the impeller is a centrifugal pump. The function is to keep the solid in a suspended state in the tank, and the operation and management are convenient.