Product Introduction:The cone crusher is a crushing machine suitable for raw materials in sand and gravel, ore dressing, metallurgy, construction, road construction, chemical and silicate industries. According to the different crushing principle and different product particle
Application:Suitable for fine crushing and ultra-fine crushing of hard rock, ore, slag, refractory materials, etc. Suitable for crushing hard and medium hard ores and rocks, such as iron ore, copper ore, limestone, quartz, granite, basalt, diabase. The type of crushi
Leave Message to get Quotation
1. Increase the eccentricity and improve the processing capacity. 2. Speed up, increase power and increase crushing fineness. 3. Raise the center of the moving cone and optimize the cavity design. 4, the liner is thickened to extend the life. 5. The hydraulic motor replaces the hydraulic push rod device, and the discharge port is precisely and continuously adjusted, and the fixed cone assembly is removed in 10 minutes. 6. High yield and fine ore content. 7. The key components are made of high-strength materials, which increase the weight and reliability.
When the spring cone crusher is working, the motor drives the large bevel gear at the bottom of the eccentric sleeve through the fluid coupling and the small bevel gear to rotate the eccentric sleeve, causing the cone to swing and break the material. The main shaft of the crusher is not moving, but the supporting spherical surface tile is subjected to the crushing force. Since the crusher main shaft does not move and the eccentric sleeve transmits the crushing force, the structure can withstand a large crushing force, and is very suitable for fine crushing and ultrafine crushing because the crushing force of the ultrafine crushing is very large. It is expected that the particle size of the product (for ultra-fine shredder liners) can be 50-80% open (depending on the nature of the material).
| Spring cone crusher | |||||||
| Model | Breaking head bottom diameter(mm) | Max. Feed size(mm) | Discharge adjustment range(mm) | Capacity (t/h) |
Power (KW) |
Eccentric shaft speed(r/min) | Weight (t) |
| PYB600 | 600 | 75 | 12—25 | 40 | 30 | 356 | 5 |
| PYD600 | 600 | 40 | 2—13 | 12—23 | 30 | 356 | 5.5 |
| PYB900 | 900 | 115 | 15-50 | 50-90 | 55 | 333 | 11.2 |
| PYZ900 | 900 | 60 | 5—20 | 20-65 | 55 | 333 | 11.2 |
| PYD900 | 900 | 50 | 3—13 | 15-50 | 55 | 333 | 11.3 |
| PYB1200 | 1200 | 145 | 20-50 | 110-168 | 110 | 300 | 24.7 |
| PYZ1200 | 1200 | 100 | 8—25 | 42-135 | 110 | 300 | 25 |
| PYD1200 | 1200 | 50 | 3—15 | 18-105 | 110 | 300 | 25.3 |
| PYB1750 | 1750 | 215 | 25-50 | 280-480 | 160 | 245 | 25.3 |
| PYZ1750 | 1750 | 185 | 10—30 | 115-320 | 160 | 245 | 25.3 |
| PYD1750 | 1750 | 85 | 5—13 | 75-230 | 160 | 245 | 50.2 |
| PYB2200 | 2200 | 300 | 30-60 | 590-1000 | 280 | 220 | 80 |
| PYZ2200 | 2200 | 230 | 10—30 | 200-580 | 280 | 220 | 80 |
| PYD2200 | 2200 | 100 | 5—15 | 120-340 | 280 | 220 | 81.4 |
