Product Introduction:Hydrocyclone is a grading device that uses centrifugal force to accelerate the sedimentation of ore particles. It requires pressure to mine, so it consumes a lot of power, but it has a small footprint, low price, large processing capacity, high classifica

Application:Hydrocyclone is a device for separating and removing heavy coarse muddy sand and other materials in sewage, and is also used for slurry classification in beneficiation.

Leave Message to get Quotation

Product Features

The hydrocyclone is a high-efficiency grading, desiccant equipment, which is widely used at home and abroad due to its simple structure, easy manufacture and large processing capacity. Its main disadvantage is that it consumes a lot of power and is seriously worn during high pressure feeding. The use of new wear-resistant materials, such as cemented carbide, silicon carbide, etc., to make the grit and the wear-resistant parts of the ore, can partially solve this problem; in addition, when used for the classification of closed-circuit grinding, because of The volume is small, and there is no buffering capacity for the fluctuation of the ore volume, which is not as stable as the mechanical classifier.

Working Principle

A cyclone is a device that uses a fluid pressure to produce a rotational motion. When the slurry enters the cyclone at a certain speed, it is forced to make a rotary motion after encountering the wall of the cyclone. Due to the different centrifugal force, the solid coarse particles in the slurry are subjected to large centrifugal force, which can overcome the hydraulic resistance to the wall of the vessel and, under the joint action of its own gravity, spiral downward along the wall, small and small. The particles and most of the water are subjected to the centrifugal force due to the small centrifugal force that is not close to the wall. Under the push of the subsequent feeding, the slurry continues to move downward and swivel, so the coarse particles continue to concentrate to the periphery, while the fine particles stay in the central region, and the particle size becomes larger and larger from the center to the wall. Layer arrangement. As the slurry flows from the cylindrical portion of the cyclone to the cone portion, the flow cross section becomes smaller and smaller. Under the contraction and compression of the outer layer slurry, the inner layer slurry containing a large amount of fine particles has to be changed in the direction of the table. The upward movement forms an internal swirling flow, which is discharged from the overflow pipe to become an overflow, and the coarse particles continue to spiral downward along the wall to form an external swirling flow, which is finally discharged from the bottom opening to become a grit. 
The cyclone group and other equipment combined with the component-level equipment group can increase the processing capacity of the mill by more than 15%. The multi-purpose screen of one of the combined equipment can automatically return the coarse particles in the overflow to the mill.

Technology Data

Cyclone specifications Processing capacity 
Grading granularity(μm) Overflow diameter(mm) Sewage mouth diameter(mm) Inlet pressure(MPa)
FX150 10—23 25-74 30-50 8—22 0.060-0.15
FX200 17-38 28-80 40-65 16-32 0.060-0.15
FX250 24-53 30-82 65-100 16-40 0.060-0.15
FX300 40-100 36-90 65-120 20-40 0.060-0.15
FX350 56-118 40-100 80-120 30-70 0.060-0.15
FX375 74-157 42-105 90-135 30-70 0.060-0.15
FX450 90-192 44-110 100-150 30-70 0.060-0.15
FX500 128-300 50-115 130-220 35-100 0.060-0.15
FX610 200-468 57-125 160-260 65-110 0.060-0.15
FX660 237-524 60-130 180-280 80-150 0.060-0.15


More Cases

Please leave your message here