Product Introduction:The ball mill is the key equipment for crushing the material after it has been crushed. This type of grinding machine is equipped with a certain number of steel balls as grinding media in its cylinder. Its cylinder is made of high wear-resistant lining, w
Application:It is widely used in cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metal dressings, and glass ceramics. It is dry for various ores and other grindable materials. Or wet grinding. According to t
Leave Message to get Quotation
1) The main bearing adopts large-diameter double-row spherical roller bearing instead of the original sliding bearing, which reduces friction and reduces energy consumption, and the mill is easy to start. (2) The end cover structure of the ordinary mill is retained, and the large-diameter inlet and outlet ports have a large processing capacity. (3) The feeder is divided into two types: a combined feeder and a drum feeder. The structure is simple and the body is installed separately. (4) Without inertial impact, the equipment runs smoothly, and the maintenance time of the mill stop and stop is reduced, and the efficiency is improved.
The motor drives the mill barrel to rotate at an appropriate speed through the transmission and deceleration of the gear set. The grinding medium placed in the cylinder is lifted to a certain height under the action of centrifugal force, friction force and gravity, and is thrown or When falling, the material in the cylinder is crushed by the impact of the medium. At the same time, due to the rolling or sliding of the medium, the material is ground by grinding and peeling. The ground material is discharged through the discharge port. The mill can be equipped with a slow drive, a jacking device, a jet lubrication device, etc., as needed.
| Lattice ball mill | |||||||
| model | Feed particle size （mm) |
Discharge size （mm) |
Processing capacity （t/h） |
Cylinder speed（r/min) | Maximum ball loading（t） | Host power（KW） | Weight（t） |
| φ900×1800 | ≦20 | 0.074-0.4 | 0.5-1 | 35.27 | 1.5 | 15 | 5 |
| φ900×3000 | ≦20 | 0.074-0.89 | 0.7-1.7 | 35.27 | 2.6 | 22 | 6 |
| φ900×4000 | ≦20 | 0.045-0.4 | 0.9-2 | 35.27 | 3.4 | 30 | 7 |
| φ1200×2400 | ≦20 | 0.074-0.4 | 1.5-4 | 30.28 | 4 | 30 | 9.5 |
| φ1200×3000 | ≦20 | 0.074-0.4 | 1.7-5.2 | 30.28 | 5 | 37 | 10.5 |
| φ1200×4500 | ≦20 | 0.074-0.4 | 1.9-7.2 | 30.28 | 7.5 | 55 | 12.8 |
| φ1200×5700 | ≦20 | 0.045-0.4 | 2.2-8 | 30.28 | 9.5 | 75 | 15 |
| φ1500×3000 | ≦25 | 0.074-0.4 | 3.5-8 | 26.45 | 8.1 | 75 | 15 |
| φ1500×3600 | ≦25 | 0.074-0.4 | 4.5-10 | 26.45 | 9.7 | 90 | 16 |
| φ1500×4500 | ≦25 | 0.074-0.4 | 5.5-12.5 | 26.45 | 12.1 | 115 | 18.8 |
| φ1500×5700 | ≦25 | 0.045-0.4 | 6.5-14.5 | 26.45 | 15.3 | 130 | 21.2 |
| φ1830×3000 | ≦25 | 0.074-0.4 | 3.0-17 | 25.23 | 12.7 | 155 | 29 |
| φ1830×3600 | ≦25 | 0.074-0.4 | 4.0-20 | 25.23 | 15.2 | 155 | 30 |
| φ1830×4500 | ≦25 | 0.074-0.4 | 5.5-22 | 25.23 | 19 | 180 | 33 |
| φ1830×7000 | ≦25 | 0.045-0.4 | 8.0-26 | 25.23 | 27.4 | 210 | 38 |
| φ2100×3600 | ≦25 | 0.074-0.4 | 6.0-33 | 24.67 | 19.2 | 210 | 35.3 |
| φ2100×4500 | ≦25 | 0.074-0.4 | 7.2-40 | 24.67 | 24 | 210 | 39 |
| φ2100×5700 | ≦25 | 0.045-0.4 | 10-52 | 24.67 | 30.4 | 245 | 45.5 |
| φ2200×3600 | ≦25 | 0.074-0.4 | 6.5-38 | 21.6 | 21.2 | 210 | 40.5 |
| φ2200×4000 | ≦25 | 0.074-0.4 | 7.2-45 | 21.6 | 23.5 | 245 | 42.8 |
| φ2200×5700 | ≦25 | 0.045-0.4 | 12-52 | 21.6 | 33.5 | 280 | 50 |
| φ2400×3600 | ≦25 | 0.074-0.4 | 9-70 | 21.54 | 25.4 | 280 | 48.8 |
| φ2400×4500 | ≦25 | 0.074-0.4 | 12-75 | 21.54 | 31.7 | 320 | 52.3 |
| φ2400×8000 | ≦25 | 0.045-0.4 | 15-90 | 21.54 | 56 | 560 | 78 |
| φ2400×11000 | ≦25 | 0.045-0.4 | 15-90 | 21.54 | 72 | 710 | 85 |
| φ2700×3600 | ≦25 | 0.074-0.4 | 15-85 | 18.23 | 32.9 | 450 | 68.2 |
| φ2700×4500 | ≦25 | 0.074-0.4 | 20-100 | 18.23 | 41.2 | 500 | 78 |
| φ2700×5700 | ≦25 | 0.045-0.4 | 23-110 | 18.23 | 49.2 | 560 | 85 |
| φ3200×4500 | ≦25 | 0.074-0.4 | 40-160 | 16.58 | 74.3 | 800 | 137 |
| φ3200×5400 | ≦25 | 0.045-0.4 | 60-190 | 16.58 | 81.2 | 1000 | 146 |
