The permanent magnet magnetic separator can continuously feed and discharge ore, with large magnetic field depth, large working gap and high processing capacity. The production efficiency of the equipment not only affects the ore dressing output, but also affects the economic benefits of the entire beneficiation production line. Among them, the production efficiency of the permanent magnet magnetic separator is related to many factors. Here, how is the production efficiency of the permanent magnet magnetic separator? Improve the introduction.



First, the speed reducer

Increasing the speed is the only rule to improve the working efficiency of the permanent magnet magnetic separator. The speed is fast and the efficiency is naturally high. The permanent magnet magnetic separator can also achieve certain effects by appropriately improving the speed reducing device, and the output per unit time is increased. Conditional concentrators can also choose to install the frequency converter to adjust the speed of the permanent magnet magnetic separator to achieve satisfactory results.

Second, the amount of water

The moisture in the ore to be processed by the permanent magnet magnetic separator has a certain influence on the working efficiency of the magnetic separator. Therefore, the proper increase of moisture in the ore in the grinding chamber can also improve the working efficiency of the permanent magnet separator. effect.

Third, the magnetic separator liner

The mill liner is mainly used to protect the cylinder and avoid direct impact and friction of the grinding body and material on the cylinder. Different types of permanent magnet magnetic separator linings can adjust the movement state of the grinding body in each bin to achieve the desired effect.

Fourth, increase the current

For the permanent magnet magnetic separator, increasing the current helps to increase the speed of the equipment, and the speed is high. The working efficiency of the permanent magnet separator is naturally high, which can be roughly determined according to the tonnage of the grinding body loading. How much power is the motor. However, it should be noted here that the increase in current must be within the rated power range of the permanent magnet separator.